Machine equipment

 IMGP9382  IMGP8184  IMGP8187 IMGP9485


Forming machines for progressive metal sheet stamping

The company OLZA, spol. s r.o. is equipped with fully automate progressive stamping machines.

Type of press-machine

Table size

Tonnage

Lift of ramp

Constricted height

Type of feeder

max. width/thicknes of belt

Two point crank press LUD 500

2500x1000mm

500t

315mm

420-520mm

cylindrical controlled

650/3mm

Two point crank press LKT 250

1500x1100 mm

250t

250mm

510-610mm

cylindrical controlled

400/3mm

One point excentric press LEK 250

1160x850mm

250t

20-180mm

350-520 mm

cylindrical controlled

300/3mm

Two point excentric press HEILBRONN 260

2200x1100mm

260t

20-200mm

470-600mm

cylindrical controlled

600/6mm

Two point excentric press PME 500 I

2500x1350mm

500t

77-250mm

540-780mm

cylindrical controlled

800/5mm

Two point excentric press PME 500 II

2500x1350mm

500t

77-250mm

540-780mm

cylindrical controlled

800/5mm

 

Forming machines for stamping in single operations

Type of press-machine

Table size

Tonnage

Two point crank press LDO 500

1500x1100mm

500 t

Eccentric press machine Erfurt PEE 160 2x

1200x800mm

160t

Eccentric press machine LE 160

100x700mm

160t

Eccentric press machine LE 110P

800x600mm

110t

Eccentric press machine LEN 25C 2x

600x400mm

25t

Eccentric press machine LEN 63C

800x600mm

63t

Hydraulic press machine SEM 320

1300x1000

320t

Hydraulic press machine PYE 100S1M

750x560

100t

Hydraulic press machine PYE 160 S/M

900x630

160t

Hydraulic press machine PYE 63 S1M

750x560

63t

 

Equipment for material modification

Wire cutting machine SODICK AQ400L

equipment for electro-erosive shaping, including perforation
maximum dimensions of parts (mm):   590x450x250 with rinse
maximum weight of parts (kg):  550
wire diameter (mm):  0,15-0,3 (0,25 used)
cut angle:  +/-20° by the height of 80 mm

Belt saws

We offer vertical and oblique cuts:
vertical 20 mm – 400 mm
oblique 20 mm-120 mm
minimum wall thickness 2 mm
maximum lenght of input material 9 m.

Sheet shears

Maximum thickness of the cut material 3mm
Maximum length 2000mm


Equipment for surface treatments

Continuous degreasing line EKOL PPSR 6/3

Maximum dimensions of degreased parts 550 x 300 x 2000mm
Maximum part weight 15 kg
Material of the part: all kind of metals, plastics resistant to 160°C
 

Continuous degreasing line OT300-1T

Degrasing equipment with one chamber for semi-operational rough cleaning of the stamped part including the drying
Maximum part weight 7 kg
Maximum dimensions of degreased parts 350 x 250 x 500mm
 

Tempering furnace TKS 060 EZKVO

It is a special technology for parts delivered for lighting facilities, where it is necessary, to secure the 100% removal of remaining microscopic dirts, that can cause so called foggy effect in the light after evaporated, which can destroy the function and the design of the headlamp. Fundamentally, the issue is the gradual warming-up of the parts up to the required temperature (max 450°C). It is being applied for the parts produced from heating galvanized metal sheets, metal sheets with aluminimu surface or stainless steel.


Grinding equipment RÖSLER R620 EURO

Capacity: 620 l
Grinding elements: plastic, ceramics
Drying: yes